Pico 8|12 Dsp

Pico 8|12 Dsp

8 CHANNEL PWM AMPLIFIER WITH INTEGRATED DSP

MOSCONI PICO 8|12 DSP

  • 8 Channel Amplifier
  • Class D Technology
  • Integrated 12 Channel DSP
  • Up to 480 Watt total power

PERFECT OEM INTEGRATION

Powerful DSP amplifier optimized for factory radio use. Four analog inputs, flexible routing, 3x input EQ and delay. With 8x50 watts ideal for active multi-way systems and extensive installations. Ready for the future with two digital inputs (SP-Dif and BT+) and two processed line outs.

SIGNAL CONTROLLED POWER SUPPLY

In contrast to Class G/H, the power supply is only switched on when required (high levels) and regulated depending on the power demand. Benefit: The quiescent current is between 250mA and 450mA (depending on the speaker circuitry) -> Especially interesting for electromobility and motorhomes

TRANSDUCERLESS HIGH-SPEED PWM POWER AMPLIFIERS

High-efficiency PWM amplifiers with the fastest carrier frequency in the world today (>2MHz), enables HiRes audio transmission and the extremely small size. The modulation is done without DAC directly from the 96kHz TDM signal of the DSP, thus the noise floor is close to zero and THD+N ~0.02% / 1W.

INPUT:

  • 4x analog inputs balanced (High-Level) up to 30V.
  • 2x analog inputs switchable high level / low level)
  • 1x digital input SP-Dif optical (8kHz - 96kHz sampling rate)
  • 1x Bluetooth port with SP-Dif - TTL (8kHz - 96kHz, e.g. for Mos AMAS Bluetooth streaming module)
  • Bluetooth extended digital audio port (BT+)
    (flexible 8kHz - 384kHz synchronous digital input for audio sources with 2 - 16 channels, direct DSP access without jitter, e.g. for MOS BTS-LD4C BT streaming module or extended analog inputs)

DSP:

  •  294.912 MHz, 32-bit audio port, 64-bit core.
  • Double Precision 56Bit filter calculation.
  • 3072 SIMD instructions per sample at 96 kHzASRCs from 1:8 up to 7.75:1 ratio and 139 dB DNR.

CONTROL:

  • 1x USB Serial Data (connection PC / GUI)
  • 1x Remote Connector (connection for RCD, RC-Mini, RTC-Hub)
  • 2x Bluetooth control Port (connection MOS-BT3.0 (App control), RC-Can (CAN bus control)
  • 1x Remote Out, 1x Remote In, Auto-Remote with Highlevel connection.
  • Connections with MOLEX® plug contacts.
  • Very small size with low heat generation, best suited for installation behind cladding.

SOFTWARE:

  • 3x 9 band parametric input EQ (de-equalizing).
  • 6x input delay 0 - 3ms / 0.01ms (de-delay)
  • 10x input level control digital (signal conditioning)
  • Flexible mixer for signal routing
    (Side separated, can sum and subtract, 10 inputs to 4x2 output groups)
  • 6x 30 band or 4x30 band + 2x15 band group EQ
    (parametric, relative phase remains stable)
  • 12x 10 band output filters
  • HighPass / LowPass / HighShelf / LowShelf / Notch / Allpass 1st + 2nd order / Speaker-EQ)
  • 12x Speaker Delay 0 - 12ms, 0.01ms
  • 12x Speaker Phase switch.

OUTPUT:

  • 8x 60W speaker output 3-Ohm stable (not bridgeable!)
  • 4x 2Vrms line outputs SN/R 112dB
  • 1x digital output optical (96kHz / 24Bit, fully masterable)

Γράψτε μια αξιολόγηση

Σημείωση: η HTML δεν επεξεργάζεται!
    Κακή           Καλή

  • Κατασκευαστής: Gladen Audio
  • Κωδικός Προϊόντος: Pico 8|12 Dsp
  • Διαθεσιμότητα: Διαθέσιμο
  • 700,00€
  • Χωρίς ΦΠΑ: 564,52€